How to fix the "freeze" issue when updating the firmware of Columbus P-10 Pro?

Posted by jack wu on

In the situation of :

If you try to downgrade the P-10 pr firmware to a previous version, it will freeze and stop functioning. 

To solve the issue, please do the below:


1. Copy and paste the below URL to your web browser's address bar and hit enter. 

http://cbgps.com/p10/firmware/v2.0/P-10.BIN

It will download v2.0 P-10.BIN file from the manufacture website.

2. In the power-off state, connect P-10 Pro with PC via the data cable. Make sure there are no files under the root directory of the MicroSD card. Copy the firmware file”P-10.BIN” to the root directory of the MicroSD card. Disconnect the P-10 Pro with the PC.


3. Press and hold the three buttons(power+POI+function buttons) at the same time , meanwhile, short press the reset button.

4. Release the three buttons until hearing short beeps, it starts updating firmware and is back to normal.

 

Remark: The above “4 buttons reset” only for the situation when the P-10 Pro is freeze. If updating the firmware for a working condition P-10 Pro, please follow the instructions on the manufacturer's website. http://cbgps.com/p10/firmware/index_en.html

 


Share this post



← Older Post Newer Post →