Tech Support by Vendors - Columbus
Instructions of setting Columbus P-10 Pro to 5Hz log mode.
Posted by jack wu on
For background info of 5Hz Columbus P-10 Pro, please refer to our previous blog post here. (optional) Config the 5Hz log mode Download the 5Hz config.txt file from here. Turn off P-10 Pro. Connect P-10 Pro to the computer with the cable, copy the downloaded configuration file “config.txt” under the root directory of the MicroSD card, and eject the device. In the power-off state, press the "Power Button" and the "POI Button “simultaneously until you hear 3 short beeps, then the 3 lamps will flash three times at the same time, and finally you hear one long beep, indicating...
5Hz logging Columbus P-10 Pro
Posted by jack wu on
This document was initially released on September 27, 2021. Please be aware that if you bought your P-10 Pro after January 1, 2022, the firmware already includes support for 5Hz logging. There is no requirement for a firmware update. The Columbus flagship logger P-10 pro has been around for a while. It has excellent accuracy but its log frequency is only 1Hz. Today, I am very excited about getting the 5Hz firmware from Columbus GPS. The firmware increases the log frequency from 1Hz to 5Hz. Very cool stuff! This could be a groundbreaking feature for some people. For example, the ones...
Battery runtime for Columbus P-1 GPS.
Posted by jack wu on
P-1 has a built-in 1900mAhrechargeable battery. In normal mode, P-1 can continuously log at 1Hz interval for 60-65 hours. If using 5 minutes spy mode and 1Hz log mode together, the battery runtime can be 15 days.
How to configure 5 minutes log interval for Columbus P-1 GPS data logger
Posted by jack wu on
The available log intervals of P-1 GPS are 1Hz, 5Hz, and 10Hz. P-1 GPS does NOT accept a 5 minutes interval. To achieve a 5 minutes interval, we have the below 2 options. Option 1: Using the 1Hz interval in P-1 GPS, downloading the CSV file and using Excel to filter the data for every 300 seconds. Option 2: Use “spy mode”. Set the spy mode to 5 minutes. When P-1 wakes up, it will log 8 waypoints. Meanwhile, the P-1 will need a little bit of time to get the position fixed. So you can achieve the...
RTK GNSS vs Dual-Frequency GNSS(P-10 Pro)
Posted by jack wu on
The below table side by side compares the 2 high accuracy GNSS positioning technologies. RTK and Columbus P-10 Pro dual-frequency. RTK GNSS Dual-Frequency GNSS (P-10 Pro) Need Base Station Network Yes No Need Correction Service Yes No Need Data Feed Yes No Geographic Limit Limited Global Accuracy Level Centi-meter Level 0.5 Meter Level Cost of Ownership High Low