Tech Support by Vendors - STOTON — TOP608BT
Why is my TOP608BT connected via bluetooth, but no data transmission?
Posted by jack wu on
It could be because the bluetooth "protocol out" settings have been changed. The bluetooth module connects to the GNSS module by UART 2 port. baud rate is 38400 (bluetooth module baud rate has to be 38400). Please use U-center and update the UART2 port to the below values if they are not already with these values. protocol in: RTCM3protocol out: UBX+NMEAbaud rate: 38400 Form U-center menu, click View --> Configuration View (or the toolbar icon) and open the configuration view windows. Select UBX --> CFG --> PRT(Ports), Please refer to the below screenshot. After changing the above settings, please save them permanently by...
Can I connect to TOP608BT GNSS receiver via bluetooth without connecting the USB cable?
Posted by jack wu on
TOP608BT can work as a standalone bluetooth GPS receiver, but it doesn't have a built-in battery. It has to connect to a USB power source (e.g. a computer's usb port or a usb portable charger/power bank) to operate.
Where to download the Windows 10 / 11 driver of TOP608BT GNSS receivers?
Posted by jack wu on
The TOP608BT driver build in to Windows 10 / 11. You don't have to install driver. Just plugin and works. In Windows' device manager, it looks similar to the below screenshot.