Connect a RTK TOP608BT GNSS receiver to a Windows 10 / 11 Laptop (ntrip via another Android device)

Below diagram showing the data flow of this implementation:

Step by step setup Instructions:

Step 1:
Configure NTRIP for the TOP608BT RTK GNSS Receiver via another Android device. Please refer to this step by step instruction.

Step 2:
Please plug the USB connector of the TOP608BT to a Windows 10 / 11 Laptop. The device will be recognized by Windows 10 / 11. No driver needs to be installed. For detail, please refer to this document.

Congratulations! Your RTK GNSS receiver has been successfully set up. The high accuracy location data from the RTK GNSS receiver is ready to use for your applications of the Windows 10 / 11 Laptop.