Tech Support by Vendors - Columbus — Columbus
5Hz logging Columbus P-10 Pro
Posted by jack wu on
This document was initially released on September 27, 2021. Please be aware that if you bought your P-10 Pro after January 1, 2022, the firmware already includes support for 5Hz logging. There is no requirement for a firmware update. The Columbus flagship logger P-10 pro has been around for a while. It has excellent accuracy but its log frequency is only 1Hz. Today, I am very excited about getting the 5Hz firmware from Columbus GPS. The firmware increases the log frequency from 1Hz to 5Hz. Very cool stuff! This could be a groundbreaking feature for some people. For example, the ones...
Battery runtime for Columbus P-1 GPS.
Posted by jack wu on
P-1 has a built-in 1900mAhrechargeable battery. In normal mode, P-1 can continuously log at 1Hz interval for 60-65 hours. If using 5 minutes spy mode and 1Hz log mode together, the battery runtime can be 15 days.
How to configure 5 minutes log interval for Columbus P-1 GPS data logger
Posted by jack wu on
The available log intervals of P-1 GPS are 1Hz, 5Hz, and 10Hz. P-1 GPS does NOT accept a 5 minutes interval. To achieve a 5 minutes interval, we have the below 2 options. Option 1: Using the 1Hz interval in P-1 GPS, downloading the CSV file and using Excel to filter the data for every 300 seconds. Option 2: Use “spy mode”. Set the spy mode to 5 minutes. When P-1 wakes up, it will log 8 waypoints. Meanwhile, the P-1 will need a little bit of time to get the position fixed. So you can achieve the...
Suggestions for obtaining high accuracy when operating Columbus P-10 Pro.
Posted by jack wu on
Click here to see the manufacturer suggestions for obtaining high accuracy when operating Columbus P-10 Pro. The accuracy of Columbus P-10 Pro is 0.5m/CEP(50%). Q: What is 0.5m/CEP(50%)? A: CEP refers to Circular Error Probable. 0.5m/CEP(50%)* means that the probability of the track points falling within a 0.5m radius is greater than 50%; * CEP tests perform under open environments & ideal GPS / GNSS placement.
What is the update / record rate of Columbus P-10 Pro GPS / GNSS Data logger?
Posted by jack wu on
The default update rate is 1Hz. It can be configured to 5Hz by updating the firmware. Please request the firmware download link by email to info@gpswebshop.com . (Please quote your order number in the subject line, we only provide this version of firmware to our customers. )